Nixon H-Enail 2-in-1 Vaporizer Kit

If you are looking for a vape that can be used for dry herbs and waxes or oils, look no further. The Nixon H-Enail 2 in 1 vape is one of the most efficient device to vaporize. It is portable enough to be taken anywhere in its small box or the vape itself. The box is almost like an unbreakable carry case.

Unlike most other electronic nails, the Nixoin e-Nail uses butane to heat up your materials. You can use the flame control to help control how hot you heat up your herbs or waxes. For wax you use the ceramic nail and for dry herbs you use metal bowls. 

There is a magnetic carb cap with a dabber that you use for concentrates. The Nixoin H-Enail 2 in 1 vape kit has a glass percolator in it to help filter out your vapor.

How to Use for Dry Herbs

1. Fill the bottom of the device with butane.
2. Adjust the heat temperature to the lowest level from the bottom of the device then adjust accordingly.
3. Put the dry herb ceramic cup into the metal neck.
4. Fill the ceramic cup with y our herbs
5. Connect glass pipe to the bottom of the metal neck tightly.
6. While holding the Nixon H-Enail, fill 1 inch of water into the glass pipe (Don’t exceed 1 inch of water).
7. Connect mouthpiece to the glass pipe
8. Place cap on top of the connected glass pipe
9. Hold the device and put glass pipe to your mouth
10. Push down and hold the button for 3 seconds then inhale.
11. release the button to stop the heat but continue to inhale to clear the chamber.
12. Push the button on the bottom of the glass pipe to release airflow and clear the smoke easier.

How to use the Nixon H-Enail for Oil

1. Fill the bottom of the device with butane.
2. Adjust the heat temperature to the lowest level from the bottom of the device then adjust accordingly.
3. Put the oil in the ceramic cup into the metal neck.
4. Connect glass pipe to the bottom of the metal nick tightly.
5. While holding the Nixon H-Enail, fill 1 inch of water into the glass pipe (Don’t exceed 1 inch of water).
6. Connect mouthpiece to the glass pipe
7. Hold the button down for about 20 seconds until it reaches the right temperature.
8. Place mouth on mouthpiece, as you put oil in the ceramic cup, then start inhaling.
9. When ready, place the cap on top of the connected glass pipe.
10. When the ceramic cool down or need more heat, repeat step 7 through 9.

Includes:

• 1 x Lighter Device
• 1 x Glass Pipe
• 1 x Detachable Mouth Piece
• 1 x Dry Ceramic Cup
• 1 x Oil Ceramic Cup
• 1 x Magnetic Cap
• 1 x Metal Nail
• 1 x Brush Cleaner
• 1 x Travel Case
• 1 x Cup Clamper